Clockwise Rotation 24mm 220-380V IE2 Hollow Shaft Motor
Hollow Shaft Motor
Hollow Shaft Electric Motor Description
Three-phase aluminum housing hollow shaft motor for pressure washers, entire copper coil, fully enclosed design, air-cooled, hollow metal tube design, squirrel cage A.C. asynchronous motor. The motor has good thermal conductivity, low current, low-temperature rise, good heat dissipation, low noise, ample starting torque, compact structure, and simple operation.
It is a 100% copper coil, high-quality bearing, high and light rotor, and rigid assembly. The shaft lift is subjected to high-frequency quenching treatment, which significantly improves the mechanical strength, maintains all the technical and maintenance advantages of the standard motor, and conforms to the IEC standard. Therefore, it is an ideal choice for cleaning equipment.
Model: HS112L-4 Horsepower: 7KW
RPM:1400 Shaft Size:24mm Hollow
Voltage: 220-380V Frequency: 50HZ
Motor housing: Aluminum Bearing Brand: C&U
Shaft: C#45 Insulation: Class F
Protection: IP55 Installation: B3 Hollow shaft 24mm
Stator&Rotor: 1. Cold-rolled silicon steel sheet by high-speed punching machine. 2.100% high-quality copper wire
Advantage:
High-quality material, good heat dissipation
high efficiency, low temperature, low noise
Seamlessly connect with equipment for worry-free operation.
| Main Specification | Standard Optional |
| Motor housing | Aluminum |
| Stator&Rotor | 1. Cold-rolled silicon steel sheet by high-speed punching machine. 2. 100% high-quality copper wire |
| bearing | C & U |
| Shaft | C#45 |
| Insulation | Class F |
| Protection | IP55 |
| Voltage | 220/380V Three Phase |
| Frequency5 | 50HZ |
| thermal protection | Yes |
| Installation | Hollow shaft 24mm |
Industry Information
Summarization and analysis of the causes of Heating of motor bearings
They are bearing ablation caused by electric corrosion. This problem is the current shaft problem we initially talked about. The necessary conditions for shaft current are shaft voltage and closed loop. Will generate shaft voltages of varying degrees for motors used under variable frequency conditions and high-power and high-voltage motors. When the shaft voltage that the lubricant's insulation cannot withstand occurs, the larger shaft current will form a closed loop through the bearing and cause ablation problems to the components of the bearing system. The initial stage of ablation is bearing noise and accompanied by Heating. In a short time, it will cause the severe failure of the bearing system due to damage to the bearing components and heating problems.
Hollow Shaft Electric Motor Application
Hollow shaft motor connection high-pressure pump used for self-service car washes and professional high-pressure washers that require a longer service life.
Production line
Production data
| Three-Phase 4 Poles 1500Rpm 50Hz |
| FRAME | POWER | RPM | COSφ | EFF.% | VOLT | AMPERE |
| KW | H.P. | P.F. | | V | A |
| 711-4 | 0.25 | 0.35 | 1370 | 0.73 | 64 | 400 | 0.8 |
| 712-4 | 0.37 | 0.5 | 1350 | 0.74 | 68 | 400 | 1.1 |
| 713-4 | 0.55 | 0.75 | 1350 | 0.75 | 66 | 400 | 1.6 |
| 90L1-4 | 1.5 | 2 | 1400 | 0.82 | 78 | 400 | 3.4 |
| 90L2-4 | 2.2 | 3 | 1400 | 0.79 | 77 | 400 | 5.4 |
| 90L3-4 | 2.6 | 3.5 | 1400 | 0.80 | 78 | 400 | 7.4 |
| 100L1-4 | 2.2 | 3 | 1400 | 0.80 | 81 | 400 | 5.1 |
| 100L2-4 | 3 | 4 | 1410 | 0.80 | 81 | 400 | 6.9 |
| 100L3-4 | 4 | 5.5 | 1420 | 0.80 | 82 | 400 | 9.4 |
| 100M1-4 | 4.4 | 6 | 1420 | 0.82 | 83 | 400 | 10 |
| 112M1-4 | 4 | 5.5 | 1420 | 0.80 | 83 | 400 | 9 |
| 112M2-4 | 5.5 | 7.5 | 1430 | 0.82 | 84 | 400 | 12.1 |
| 112M3-4 | 6.2 | 8.5 | 1425 | 0.82 | 84 | 400 | 13.5 |
| 112L-4 | 7 | 9.5 | 1430 | 0.80 | 85 | 400 | 13.8 |
| 132S1-4 | 5.5 | 7.5 | 1430 | 0.82 | 84 | 400 | 11.7 |
| 132S2-4 | 7.5 | 10 | 1430 | 0.84 | 84 | 400 | 15.4 |
| 132M1-4 | 9.2 | 12.5 | 1430 | 0.90 | 85 | 400 | 17.8 |
| 132M2-4 | 11 | 15 | 1430 | 0.90 | 87 | 400 | 21.3 |
| 132M3-4 | 12.5 | 17 | 1430 | 0.88 | 84 | 400 | 26 |
| 160M1-4 | 15 | 20 | 1450 | 0.86 | 89 | 400 | 29 |
| 160M2-4 | 18.5 | 25 | 1450 | 0.86 | 90 | 400 | 34 |
Hollow Shaft Motor
Guarantee:
Guarantee for one year from shipped on board date. During the guarantee period, our company will provide free easy-damaged spare parts for problems caused by our quality of production or raw material, except the damageable spare parts caused by the customer's incorrect manufacturing operation. In addition, After expiration, our company provides cost spare parts for maintenance.
Our service:
1. Directly factory sale
2. Quick response to 2-8hours, response rates over 92%
3. 24 hours phone call is available. Feel free to contact us.
4. All goods are produced by ourselves. We provide one-stop services from designing and printing to processing. Customers can provide the design according to your request and sample making. Also, we can advise how to make the products according to customers' target prices.
FAQ:
1. Q: What's the MOQ?
A: We accept one piece.
2. Q: Are you a factory or trading company?
A: We are a manufacturer.
3. Q: Can you accept using our logo?
A: Yes, we can do OEM for you.
4. Q: What's the warranty period?
A: 1 year.
5. Q: What are the terms of payment?
A: T/T. 30% deposit and 70% against the B.L. copy or 100% L.C.
Product Tags:
|
|
Clockwise Rotation 24mm 220-380V IE2 Hollow Shaft Motor Images
|
